Model: NL-JS3
The problem
Water-efficiency label filings demand one supply condition per appliance standard - toilets, squat pans, urinals, flush valves, faucets and showers each under their own GB. Labs that only plumbed for toilets must rebuild piping for flush valves and urinals, and the measured grade never quite repeats.
Capability
One system covers seven appliance types: sitting toilets, squat pans, urinals, flush valves, ceramic faucets, showers and sanitary ceramics, plus intelligent-toilet energy/water testing. Three stations run one at a time, switching between a tank-type toilet standard supply and a dedicated supply for toilets, urinals, squat pans, flush valves and ceramic faucets. Dynamic pressure 0.05-1.5MPa from a multistage pump with inverter and pressure sensor; static pressure 0.1-1.8MPa for sealing and strength tests. Water-consumption capture is automatic: static pressure, maximum flow velocity, minimum flowing pressure, main flush volume, total flush volume and trailing volume, with average consumption and water efficiency value computed. Full flushing-performance suite: ball evacuation (100 x 19mm polypropylene balls, 3-flush average >=90), granule evacuation (2500 granules, <=125 remaining), ink-line (<=50mm total, <=13mm per segment), trap-seal recovery (>=50mm), mixed media, waste replacement (dilution >=100), toilet paper and splash tests. Drainline conveyance uses an 18m 100mm pipe at 2% slope with a >=12m average transport requirement; DN120 transparent drain makes flow visible. PLC + 15-inch industrial PC with report generation, networking, storage and printing; SUS304 tank and frame; AC380V 3kW; flow up to 4m3/h; 2 artificial test bodies included.
Key specifications
- Application: water-efficiency grading of 7 sanitary appliance types
- Standards: GB 25502-2017, GB 25501-2010, GB 28378-2012, GB 28379-2012, GB 28377-2012, GB 30717-2014, GB 6952-2015, GB/T 31436-2015, GB/T 34549-2017
- Stations: 3, single-station test selection, dual standard-supply systems
- Dynamic pressure: 0.05-1.5MPa adjustable (inverter constant-pressure supply)
- Static pressure: 0.1-1.8MPa settable (sealing/strength tests)
- Air supply: 0.3-0.6MPa external; flow up to 4m3/h
- Drain: DN120 transparent pipe >=19m (site >=20m); 18m x 100mm conveyance pipe at 2% slope
- Consumption metrics: static pressure, max velocity, min flowing pressure, main/total/trailing flush volumes
- Flushing suite: ball, granule, ink-line, trap-seal recovery, mixed media, waste replacement, paper, splash
- Control: PLC + 15-inch industrial PC, report generation, network storage and printing
- Build: SUS304 tank and frame; AC380V 3kW; 2 artificial test bodies
Applications
Water-efficiency label testing at sanitary-ware and fixture plants; inspection-body certification and filing tests; water-saving certification laboratories; brand-owner self-assessment and type testing
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.