Model: NL-XMKM-1
The problem
Hinge play, latch failure and door sag only surface after tens of thousands of opening cycles. Manual door-cycling tests vary in force and miscount, so by the time a whole-machine reliability test exposes the door, the rework bill has multiplied.
Capability
The rig covers button-spring doors, spring doors, drop-down doors, flip lids and left-opening washer doors on one bench. Opening angle 0-180deg set on the touch screen; speed 0-10 cycles/min with opening and closing speeds set independently. A servo-driven pneumatic gripper reproduces the real grab-and-pull motion, with a spring buffer that keeps closing force and speed under control. Counting from 100000 cycles upward, freely settable, with the time stamped automatically every 10000 cycles. Failure monitoring covers door-not-open and door-not-closed conditions (hinge or gripper failure stops the test immediately); the sample is powered automatically and the current signal is watched throughout, with digital voltmeter and ammeter alarming on supply failure or electrical damage. Over-current, leakage and overheat protection allow unattended runs; a network port is reserved for later data extraction. Fixed worktable with universal fixtures, max sample height 1600mm, inner space W750xD800xH1200mm, overall 1020x1300x1600mm, AC220V 50Hz up to 2800W, air supply 4-6kg/cm2.
Key specifications
- Application: durability testing of washer doors (flat-open, drop-down, flip, left-open, spring types)
- Opening angle: 0-180deg, touch-screen setting
- Speed: 0-10 cycles/min, opening and closing set independently
- Gripper: pneumatic robotic hand with spring buffer, closing force/speed adjustable
- Drive: servo motor with reduction gearing
- Counting: 100000+ settable, time auto-stamped every 10000 cycles
- Live monitoring: powered sample current watch, digital V/A meters with alarms
- Fault alarms: door-not-open / door-not-closed detection, immediate stop
- Protection: over-current, leakage, overheat; unattended operation
- Sample: max height 1600mm; inner W750xD800xH1200mm; overall 1020x1300x1600mm
- Supply: AC220V 50Hz <=2800W; air 4-6kg/cm2; network port reserved
Applications
Door reliability validation at washer plants; hinge and latch supplier life testing; door structure R&D comparison trials; third-party durability commissioning
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.