MLT21T is based on the MeChatrolink-II bus,
the maximum number of control axes is 6, and the maximum spindle is 3.
Support servo parameters online configuration, servo status online
monitoring. Hands with trajectory preview, teaching programming, graphic
auxiliary programming, support multi-spindle control, can achieve
machining functions such as polygonal wheeled and car milling composite.
It can meet the control requirements of the diagonal machine control
machine tool and the turning center.
Main technical characteristics
Mechatrolink-II bus control
Servo online configuration and monitoring
Two-way pitch error compensation
Tool life management
Automatic chip control
Support configuration interface
Multi-spindle control, support for car milling composite processing
Parallel PLC axis control
Support for two-handed control
With network interface, networking supports NC machine tools
Separate machine tool operator panel
l 主要技术规格
|
project
|
Specification
|
|
Control form /
|
MECHATROLINK-Ⅱ，Spindle support pulse interface control
|
|
Control axes
|
Number of control axes: 6 axis
|
|
Linkage axes: 6 axis (linear interpolation), 2 axis (arc interpolation)
|
|
Minimum instruction
|
0.001mm/0.001°(IS-B)
0.0001mm/0.0001°(IS-C)
|
|
Maximum fast-moving speed
|
μ (IS-B) 60000 mm / min
0.1μ (IS-C) 24000 mm / min
|
|
Maximum cutting speed
|
μ (IS-B) 30000 mm / min
0.1μ (IS-C) 24000 mm / min
|
|
Basic IO
|
32/32
|
|
Cylindrical interpolation
|
yes
|
|
Polar coordinate interpolation
|
yes
|
|
Polygonal wheel
|
yes
|
|
Automatic tool offset
|
yes
|
|
Panel structure
|
Separate panel
|
|
Dimensions (width × height × Deep, unit: mm)
|
Horizontal
|
Host: 400 × 200 × 100
Machine Operator Panel: 400 × 200 × 80
|
|
Vertical
|
Host: 260 × 290 × 100
Machine Operator Panel: 260 × 290 × 80
|